⭐⭐⭐⭐⭐ Rating of 4.8 based on 200+ Google Reviews
Bank Security System Installer
Safe and Sound Security installs bank security systems with NDAA-compliant cameras, vault access control, and FDIC-aligned alarms for community banks and credit unions.
Get A Free Quote
🔒︎ Your information will be kept Private
19+
Years of Experience
20k+
Locations Protected
99%
Satisfaction Rating
Our Certifications
Trusted by Financial Institutions
Safe and Sound Security is a Verkada Platinum Partner, holds C7 #1039579 and ACO #6672, and is approved on 15+ procurement vehicles including GSA Schedule 84, BuyBoard, and E&I Cooperative. That combination is what financial institutions need to pass an FDIC examination and pay through their own purchasing programs.
Security system installation service
CHALLENGES
What 12 CFR Part 326 and the Bank Protection Act Require From Your Security System
Every FDIC-supervised bank operates under 12 CFR Part 326, which implements the Bank Protection Act of 1968 and sets the minimum security devices a banking office must maintain. Safe and Sound Security designs bank security systems that satisfy 326 minimums and add the modern controls FDIC examiners now look for.
12 CFR 326 minimum security devices
12 CFR Part 326 requires every banking office to maintain a vault or safe, vault-area lighting visible from outside, tamper-resistant exterior locks, and an alarm system that notifies the nearest law enforcement officers of an attempted or perpetrated robbery or burglary. Each bank’s board-designated security officer reports to the board annually on the program.
Multi-layer threat coverage
Modern bank security covers more than the 326 minimums. Silent panic buttons at the teller line trigger law-enforcement notification without alerting the suspect. AI video analytics flag loitering at ATMs, weapon detection at the entry vestibule, and unusual movement around the vault. Each layer logs to a central platform that produces FDIC examination evidence.
Audit trail and evidence retention
Bank security cameras record at HD or 4K and retain 90 days to one year of footage for incident investigation and FDIC examination. For credit unions tied to federal deposits or government contracts, NDAA Section 889 bans cameras from Hikvision, Dahua, Hytera, Huawei, and ZTE.
After-hours and ATM protection
ATM kiosks need anti-skimming on the card reader, seismic sensors in the safe, and thermal or low-light cameras for the parking lot perimeter. Vault and server rooms add environmental sensors for smoke, heat, and water leaks. After hours, motion and glass-break sensors arm with the alarm and notify the central station.
How Safe and Sound Security Designs and Installs a Bank Security System
Safe and Sound Security designs every bank security system around the threat surface specific to your branch network. The site survey maps entry vestibules, the teller line, vault access, ATM kiosks, and the IT/server room, then assigns the right platform to each zone. Verkada cloud cameras are FIPS 140-2 validated and deploy without an NVR, which is the simplest path for community banks. Avigilon Unity is DoDIN APL certified for regional banks running Genetec or Milestone VMS already. Brivo handles cloud access at the front door and back office. Lenel is the FICAM and FIPS 201 path for credit unions with federal-deposit ties.
What a Complete Bank Security System Includes
A complete bank security system has eight components:
- AI video surveillance: HD and 4K cameras with facial recognition, LPR, and loitering detection at every entry, teller line, and ATM.
- Vault and door access: biometric, mobile, and card readers with audit logs at vault, server, and back office doors.
- Intrusion detection: motion, glass-break, and door contacts monitored 24/7 by a UL-listed central station.
- Silent panic buttons: wearable and desk-mounted at the teller line, immediate law-enforcement notification.
- Weapon detection: AI analytics or physical scanners at the entry vestibule.
- ATM protection: anti-skimming, seismic sensors in the safe, thermal cameras for the parking lot.
- Environmental sensors: smoke, heat, and water leak detection for vaults and server rooms.
- Cyber and physical integration: encrypted network between cameras, readers, panels, and the central platform.
Branch-Hours Site Survey, After-Hours Cabling, and IT Coordination With Your Core
Bank installs run on a four-step sequence. Safe and Sound Security holds the C7 Low Voltage License #1039579 and ACO #6672, so cabling and alarm work happen under one contractor. The site survey is during branch hours so we can see real teller flow and ATM use. Cabling and rough-in run after close. Camera, access reader, and panel installation take one to three weeks per branch depending on size. Commissioning includes a walkthrough with your security officer and an integration test with your core banking provider so the alarm, access logs, and video evidence map to your existing IT infrastructure.
How Banks and Credit Unions Buy Through Safe and Sound Security
Safe and Sound Security is approved on 15+ government and cooperative purchasing programs, which lets banks and credit unions skip a separate competitive bid. Federal credit unions and state-agency-affiliated banks purchase through GSA Schedule 84, E&I Cooperative, OMNIA Partners, Sourcewell, BuyBoard, and CMAS. Multi-branch rollouts run under one C7 license, one ACO license, and one point of accountability across all 50 states. NDAA Section 889 compliant cameras (Verkada, Avigilon, Axis, Bosch) ship by default for federally-tied institutions.
The Banks and Financial Institutions Safe and Sound Security Installs For
Safe and Sound Security installs bank security systems at single-branch community banks, multi-state regional bank networks, federally-insured credit unions, and standalone ATM fleets. Each segment gets a different platform stack matched to its compliance posture, branch count, and procurement path. The seven configurations below cover the most common builds.
Community Banks
Single-branch community banks use DMP panels that combine intrusion, fire, and access control in one American-made box, paired with Verkada cloud cameras. One panel, one app, no separate fire/security/access vendors. Pricing depends on branch size and camera count, free site survey available.
Regional Banks
Regional banks running 5 to 50 branches use Avigilon Unity for VMS with on-premise NVR redundancy and cloud failover, paired with Brivo for cloud access at every door. Branch managers see only their location, regional security ops sees the full footprint, and the FDIC examiner gets a single audit trail. Genetec Security Center is the open-architecture alternative for existing fleets.
Credit Unions
Federal credit unions and state-chartered credit unions tied to federal deposits run Lenel for FICAM, FIPS 201, and HSPD-12 compliant access control. Verkada cameras carry FIPS 140-2 validation. Purchasing flows through E&I Cooperative or NASPO ValuePoint for smaller credit unions, GSA Schedule 84 for federally-tied institutions.
Commercial Banks
Commercial banks at the SOC level run Genetec Security Center as the unified VMS, ALPR, and access control platform, with 900-plus integration partners for badge, HR, and IT systems. AI analytics push directly to the corporate SOC. Bosch B/G Series intrusion panels and Honeywell Vista panels handle the alarm side under DoD-tested specifications. NDAA Section 889 compliant by default.
Savings and Loan Institutions
Savings and loan institutions get DMP intrusion with vault sensors and seismic detection on the safe, plus dual-authority access control on the vault door (two credentials required, every attempt logged). Notifier or Silent Knight handles the fire alarm side under NFPA 72 with Notifier-default RFP language.
Investment Firms
Investment firms and wealth management offices run Avigilon Alta for touchless cloud access, Verkada Guest for visitor management with photo capture and watchlist matching, and discreet Axis cameras in client meeting areas. The full audit trail supports SEC and state-regulator client-data documentation.
ATM Networks
Standalone ATM kiosks and bank-branch ATMs use anti-skimming detection on the card reader, seismic sensors in the safe, and thermal or low-light cameras across the parking lot perimeter. Verkada or Axis cameras feed back to a central monitoring platform. Vandalism, robbery, and skimming events trigger central-station response within minutes.
Verkada Platinum Partner, NDAA-Compliant Options, and 15+ Procurement Vehicles for Banks
Safe and Sound Security has installed at more than 20,000 business and government locations over 19 years. The credentials that matter for an FDIC-supervised bank or federally-insured credit union: Verkada Platinum Partner (top tier with FIPS 140-2 validated cameras), NDAA Section 889 compliant options on every camera and access platform we install, GSA Schedule 84, BuyBoard, E&I Cooperative, OMNIA Partners, and CMAS purchasing approval. C7 Low Voltage #1039579, ACO #6672, NICET-certified fire alarm technicians, and BICSI-certified cabling, all in-house. One contractor, every license, nationwide.
Schedule a Bank Security Assessment With Safe and Sound Security
Protecting a bank starts with a documented audit of where your current system meets 12 CFR Part 326 and where it falls short. Safe and Sound Security walks your branch with you, maps every camera, access reader, panic button, vault sensor, and ATM kiosk, then writes a gap report tied to the regulation. Bring your security officer; the report supports their annual program review to the board under 12 CFR 326. The assessment is free. The report is yours to keep, whether you hire us or not. Schedule your bank security assessment and our team will follow up within one business day to set the site survey.
FAQs
What security systems do banks use?
Banks use eight security systems together: AI-powered video surveillance, vault and door access control, intrusion detection, silent panic buttons, weapon detection, ATM anti-skimming and seismic sensors, environmental sensors, and 24/7 central-station monitoring. Each layer logs to a central platform for FDIC examination evidence. Safe and Sound Security installs all eight under one C7 contractor.
What do banks need to meet regulatory compliance?
Banks must meet FDIC requirements under 12 CFR Part 326, which requires a vault or safe, vault-area lighting, tamper-resistant exterior locks, and an alarm system that notifies the nearest law enforcement officers of a robbery or burglary. Most banks add cameras at every transaction area, video at teller windows and parking lots, and access control with audit trails as the security officer’s “other appropriate devices.”
How much does a security system cost for banks?
Pricing depends on branch count, camera count, access control points, panic button locations, ATM kiosks, and whether cabling already exists. Multi-branch installs price lower per branch through volume. Cloud-based platforms shift cost from upfront hardware to monthly per-camera fees. Free site survey available.
What are the components of a comprehensive system for banks?
Complete protection for banks includes HD cameras with AI analytics, vault and safe intrusion sensors, biometric or card-based access control, panic buttons at teller windows, weapon detection at the entry vestibule, ATM anti-skimming and seismic sensors, environmental sensors for vault/server rooms, motion and glass-break sensors, and a central monitoring platform. Each component logs to one audit trail.
How do modern cameras at banks integrate with existing infrastructure?
Modern bank cameras connect over standard IP. Open-platform VMS like Genetec Security Center, Milestone, and ExacqVision plug into existing infrastructure without ripping out hardware. Cloud platforms (Verkada, Avigilon Alta, Brivo) connect by API to core banking software for transaction-triggered alerts. Existing cabling is reused where it meets spec.
How do FDIC standards affect requirements for banks?
The FDIC’s 12 CFR Part 326 (and the Federal Reserve’s 12 CFR § 208.61, OCC’s 12 CFR Part 21) implement the Bank Protection Act of 1968. Each bank’s board-designated security officer develops a written program and reports annually on effectiveness. Camera retention, alarm response, and access logs must produce evidence FDIC examiners can review.
How long does it take to install cameras at a bank?
Single-branch installs typically complete in one to three weeks: site assessment, equipment procurement, cabling, camera and access reader installation, and security officer training. Multi-branch rollouts phase over several months. Evening and weekend work keeps the lobby open during banking hours.
What ongoing maintenance do bank cameras require?
Bank cameras need quarterly visual inspection of mounts, lens, and field of view. Firmware updates apply monthly or as the manufacturer releases. Most banks schedule a semiannual preventive-maintenance visit (lens cleaning, NVR storage check, panel battery test) and an annual full system audit.
How do you minimize disruption when upgrading at banks?
Phased rollout keeps the branch open during upgrades. Cabling, mounting, and panel work runs after close. Cutover happens overnight so the new system is live by branch open. Modular platforms (Verkada, Brivo, Avigilon Alta) let you upgrade cameras or readers without replacing the whole stack.
What's the difference between traditional and cloud-based systems for banks?
Traditional bank surveillance stores video on a local NVR or DVR, requires on-site maintenance, and limits remote access. Cloud-based platforms like Verkada (no NVR at all) and Avigilon Alta (cloud + on-premise hybrid) store footage offsite in data centers, allow remote access from any device, scale across branches, and update firmware automatically without truck rolls.
Should banks use proprietary or open-platform systems?
Open-platform systems (Genetec Security Center, Milestone, ExacqVision) integrate cameras from any manufacturer and avoid vendor lock-in. Proprietary cloud platforms (Verkada, Avigilon Alta) trade flexibility for tighter integration, automatic updates, and faster deployment. Multi-branch regional banks usually pick open. Single-branch community banks usually pick proprietary cloud.
Locations
Click a pin drop on the map to get more information!
Blogs
Commercial Security Camera Installation Guide & Expert Tips (2026)
Protecting your facility requires more than locking the doors. Theft, vandalism, and liability put commercial and government sites at risk, and a professionally installed commercial
Access Control Installation: Step-by-Step Guide (2026)
Managing who enters your facility — and when — is a foundational security requirement for any commercial building, campus, or government site. Modern access control
Burglar Alarm System Installation: Step-by-Step Guide
Commercial alarm systems have various configurations, integration capabilities, and use cases. No matter the case, businesses that house expensive merchandise or private data need a commercial-grade
19+
Years of Experience
20k+
Locations Protected
200+
Google Reviews
Let’s start a conversation.
Fill out the form below and one of our specialists will call you.
Security system installation service
